30V Input 2A Buck DC/DC Converter
The R1243x Series is the CMOS-based Step-Down DC/DC Converter with internal Nch high side Tr. (0.175Ω), which can provide the maximum 2A output current. The IC consists of an Oscillator, a PWM control circuit, a Reference Voltage unit, an Error amplifier, phase compensation circuits, a slope circuit, a soft start circuit, protection circuits, internal voltage regulators, and a switch for bootstrap circuit. The R1243x Series can make up a Step-Down DC/DC Converter with the following external components: an inductor, resistors, a diode, and capacitors.
The R1243x series are current mode operating type DC/DC converter which does not require external current sense resistor, and it works high speed response time, high efficiency and compatible with ceramic capacitors.
There are two types for the oscillator frequency. A/B version's frequency is fixed 1000kHz, and C/D version's frequency is fixed 330kHz.As a protection function, it has cycle by cycle peak current limit function, short protection function, thermal shutdown function and UVLO.
There are two types for short protection, A/C version has latch protection function with 2ms delay time, and B/D version has fold back protection function that keep operating at short condition with lower operating frequency and limiting the Lx current.
The R1243 Series has the built-in soft start time (Typ. 0.4ms). In addition to this, the soft start time is adjustable by adding an external capacitor. The R1243x Series has the FLG pin, which mainly monitors the FB pin voltage and gives the flag output by the Nch open drain if the abnormal condition is detected.
Since the packages for these ICs are HSOP-8E, and DFN(PLP)2527-10, therefore high density mounting of the ICs on boards is possible.
|Operating Voltage||4.5V ~ 30V|
|Standby Function||Typ. 0μA, Max. 10μA (VIN =30V, CE="L")|
|Supply Current||Typ. 0.7mA (VIN=30V VFB=1.0V)|
|Output Voltage Range||0.8V ~ 18V (Adjustable with external resistor)|
|Feed Back Voltage||0.5V with 1.4% accuracy|
|Output Current||Max. 2A|
|Peak Current Limit Function||Typ. 3.8A|
|Internal Nch MOSFET Driver||Typ. 175mΩ|
|Maximum Duty Cycle||Min. 85%|
|Operating Frequency||Ver.A/B 1000kHz, Ver.C/D 330kHz|
|Short protection delay time for Output Latch||Typ. 2ms : Ver.A/C|
|Built-in Foldback Protection and its Frequency||1/4 frequency at fold condition : Ver.B/D
Ver.B 250kHz, Ver.D 82.5kHz
|Internal Soft Start Time||Typ. 0.4ms, with TSS pin open|
|External Soft Start Time||Typ. 12ms, with CSS=0.1μF|
|Flag Output Function||Typ. 0.25ms, FLG “OFF” delay time|
|UVLO Released Voltage||Typ. 4.0V|
|Thermal Shutdown Function||Typ. 160°C, with 35°C hysteresis|
- *)This is an approximate value, because output current depends on conditions and external parts.
- •Power source for digital home appliance
- •Power source for hand-held communication equipment, cameras, video instruments such as VCRs, camcorders.
- •Power source for battery-powered equipment.
- •Battery Charger
|Data Sheet||Flyer||Package Info.||Mark Info.||Quality Assurance Data|
All PDF files are less than 1MB unless otherwise stated.
- Technical Support