300mA LDO Regulator with the Reverse Current Protection for Automotive Applications
R1191x Series are a low supply current voltage regulator with high output voltage accuracy. The maximum operating voltage is 16V. These ICs can switch to the fast mode and the low power mode by the low power / fast mode changer pin (ECO pin) without changing the output voltage value.
Each of these ICs consists of a voltage reference unit, an error amplifier, a resistor-net for voltage setting, a short current limit circuit, a thermal shutdown circuit and a chip enable circuit.
Moreover, the R1191x Series has the reverse current protection function, which protects the reverse current flow into VDD pin when the output pin voltage becomes higher than the VDD pin voltage. Thus it is suitable for the back-up circuit.
Since the packages for these ICs are SOT-89-5 and SOT-23-5, therefore high density mounting of the ICs on boards is possible.
|Input Voltage Range (Maximum Rating)||3.5V to 16.0V (18V)|
|Supply Current||Typ. 50µA (Fast Mode),
Typ. 6.0µA (Low Power Mode)
|Standby Mode||Typ. 0.3µA|
|Reverse Current||Max. 0.1µA|
|Output Current||Min. 300mA|
|Output Voltage Range||2.0V to 15.0V (0.1V steps)|
|Output Voltage Accuracy||±1.5% (Fast Mode)
±2.5% (Low Power Mode)
|Temperature-Drift Coefficient of Output Voltage||Typ. ±80ppm/°C|
|Dropout Voltage||Typ. 0.55V (Fast Mode, IOUT=300mA, VOUT=5.0V)
Typ. 0.70V (Low Power Mode, IOUT=300mA, VOUT=5.0V)
|Ripple Rejection||Typ. 60dB (f=1kHz,VOUT=5.0V, Fast Mode)|
|Line Regulation||Typ. 0.02%/V (Fast Mode)|
|Built-in fold-back protection circuit||Typ. 50mA (Current at short mode)|
|Built-in Thermal Shutdown Circuit||Shutdown Temperature at 150°C|
|Ceramic capacitors are recommended to be used with this IC||CIN=2.2µF or more, COUT=4.7µF or more|
- ・Power source for accessories such as car audios, car navigation systems, and ETC systems
|Data Sheet||Package||Quality Assurance Data||Suffix||Composition & Content*1|
|SOT-23-5||-AE||Sn (Sn: 100%)|
|SOT-89-5||-AE||Sn (Sn: 100%)|
- *1The composition of the product cannot be specified.