Low Noise 150mA LDO Regulator for Automotive Applications
The R1114x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load transient response of the R1114x Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the package for these ICs is SOT-23-5, the high density mounting of the ICs on boards is possible.
|Input Voltage Range (Maximum Rating)||2.0V to 6V (6.5V)|
|Supply Current||Typ. 75µA|
|Standby Mode||Typ. 0.1µA|
|Dropout Voltage||Typ. 0.22V (IOUT=150mA 3.0V Output type)|
|Ripple Rejection||Typ. 70dB (f=1kHz 3.0V Output type)
Typ. 60dB (f=10kHz)
|Output Voltage Range||1.5V to 4.0V (0.1V steps)
(For other voltages, please refer to MARK SPECIFICATION TABLE)
|Output Voltage Accuracy||±2.0%|
|Temperature-Drift Coefficient of Output Voltage||Typ. ±100ppm/°C|
|Line Regulation||Typ. 0.02%/V|
|Output Noise||TYP. 30µVrms (BW=10Hz~100kHz)|
|Built-in Fold Back Protection Circuit||Typ. 40mA (Current at short mode)|
|Ceramic capacitors are recommended to be used with this IC||CIN=COUT=1µF (VOUT<2.5V)
CIN=1µF, COUT=0.47µF (VOUT> = 2.5V)
- ・Power source for accessories such as car audios, car navigation systems, and ETC systems
|Data Sheet||Package||Quality Assurance Data||Suffix||Composition & Content*1|
|SOT-23-5||to be prepared||-AE||Sn (Sn: 100%)|
- *1The composition of the product cannot be specified.